Insulated Metal Panels Tape & Sealant

Perimeter Flashing Butyl Sealant Tape

Part #	Type	Width	Thickness	Length	Color
7405	Butyl	1″	1/4″	20′-0″	White

Use:
The tape provides a continuous seal for all CFR trim
Use when tape will cross Mesa profiles (interior or exterior)
Quantity:
(Linear Feet of Tape) / 20′ = # of rolls
Refer to CFR Installation Guide to determine if 1 or 2 strips of tape are required for each trim

1" Butyl Sealant Tape

Part #	Type	Width	Thickness	Length	Color
7300	Butyl	1″	1/8″	40′-0″	Gray

Use:
Flashings – Tape is used to form a continuous, waterproof seal between flashings and panels and to seal openings where fasteners penetrate the flashing and panel. Also used as vapor sealant and cut edges of wall panels

Quantity:
LF/40 = # of rolls

Tape Sealer

Part #	Type	Width	Thickness	Length	Carton QTY
HW-507	Flat	1/2″	3/32″	50′-0″	20 Rolls

Tri-Bead Tape Sealer

Part #	Type	Width	Thickness	Length	Carton QTY
HW-504	Tri-Bead	7/8″	3/16″	25′-0″	8 Rolls

Triple Bead Tape Sealer

Part #	Type	Width	Thickness	Length	Carton QTY
HW-502	Triple Bead	2 1/2″	3/16″	20′-0″	6 Rolls

Tube Sealant

Part #	Type	Color	Tube Size	Carton QTY	Weight Each
HW-540	Urethane	White	11 Ounce	30	.85#
HW-541	Urethane	Gray	11 Ounce	30	.85#
HW-542	Urethane	Bronze	11 Ounce	30	.85#
HW-543	Urethane	Almond	11 Ounce	30	.85#
7100	Non-Skinning Butyl	White	10 Ounce	30	.85#
7101	Silicone	White	10 Ounce	30	.95#

Note:
25′ per tube at 1/4″ bead

Tape and Sealant