Roof Hugger - Model C

Part #
HW-1240C

Note:

  • Prices are non-discountable
  • Add $275 crate/packaging fee for orders under 1,500 LF
  • Weight per 10′-0″ piece – 10.60#
  • This part fits most, but not all, R profiles; Customer should confirm fit
  • Fasteners are ordered separately; 1 /4″-14 Tek 3 is typical
  • If customer requires engineering, call MBCI with project specifics to obtain engineering fee
  • MBCI will assume no responsibility for code compliance unless engineering is included in project proposal
  • Delivery – approximately 5 working days

Roof Hugger - Model D

Part #
HW-1240D

Note:

  • Height 4.5″, Base 1.25″, Top 2″, Length 10″
  • Fits over existing trapezoidal panels with low clips
  • Prices are non-discountable
  • Add $275 crate/packaging fee for orders under 1,500 LF
  • Weight per 10′-0″ piece – 17.70#
  • This part fits most, but not all, trapezoidal profiles; Customer should confirm fit
  • Fasteners are ordered separately; 1 /4″-14 Tek 3 is typical
  • If customer requires engineering, call MBCI with project specifics to obtain engineering fee
  • MBCI will assume no responsibility for code compliance unless engineering is included in project proposal
  • Delivery – approximately 5 working days

Roof Hugger - Model T

Part #
HW-1240T

Note:

  • Height 4.5″, Base 1.50″, Top 2″, Length 10″
  • Fits over existing trapezoidal panels with high clips
  • Prices are non-discountable
  • Add $275 crate/packaging fee for orders under 1,500 LF
  • Weight per 10′-0″ piece – 17.70#
  • This part fits most, but not all, trapezoidal profiles; Customer should confirm fit
  • Special fasteners required to attach Hugger to existing purlin; #17 fasteners also required at the Hugger “arms” to attach to side of trapezoids
  • Confirm that eave does not have thermal blocks or standoff clips
  • If customer requires engineering, call MBCI with project specifics to obtain engineering fee
  • MBCI will assume no responsibility for code compliance unless engineering is included in project proposal
  • Delivery – approximately 3 weeks

Roof Hugger - Vertical Rib

Part # Existing Panel Width
HW-1240VR12 12″
HW-1240VR16 16″
HW-1240VR18 18″

Note:

  • Prices are non-discountable
  • Add $275 crate/packaging fee for orders under 1,500 LF
  • Weight per 10′-0″ piece – 13.30#
  • Specify existing panel width; verify existing panel rib height is no more than 2″
  • Fasteners are ordered separately; 1/4″-14 Tek 3 is typical
  • If customer requires engineering, call MBCI with project specifics to obtain engineering fee
  • MBCI will assume no responsibility for code compliance unless engineering is included in project proposal
  • For Vertical Rib panels with high clips, please inquire
  • Delivery – approximately 3 weeks

Find a sales representative