| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| T-5111 | 10′-2″ | 3″ | 2.45# |
Note:
Use with vertical applications (Fascia) only
24 gauge material only
| Part # | DIM “A” | Length | Girth | Weight Each |
|---|---|---|---|---|
| T-5181 | 1 1/4″ | 10′-2″ | 7″ | 5.73# |
| T-5182 | 1 1/4″ | 20′-2″ | 7″ | 11.46# |
| T-5183 | 2 1/4″ | 10′-2″ | 9″ | 7.37# |
| T-5184 | 2 1/4″ | 20′-2″ | 9″ | 14.74# |
Note:
Specify angle indicated on drawing
| Part # | DIM “A” | DIM “B” | Length | Girth | Weight Each |
|---|---|---|---|---|---|
| T-5191 | 1 1/4″ | 3 3/4″ | 10′-2″ | 9″ | 7.45# |
| T-5193 | 2 1/4″ | 4 3/4″ | 10′-2″ | 11″ | 9.10# |
Note:
Specify angle indicated on drawing
| Part # | DIM “A” | DIM “B” | Length | Girth | Weight Each |
|---|---|---|---|---|---|
| T-5201 | 1 1/4″ | 3 3/4″ | 10′-2″ | 11″ | 9.01# |
| T-5202 | 1 1/4″ | 3 3/4″ | 20′-2″ | 11″ | 18.02# |
| T-5203 | 2 1/4″ | 4 3/4″ | 10′-2″ | 13″ | 10.64# |
| T-5204 | 2 1/4″ | 4 3/4″ | 20′-2″ | 13″ | 21.29# |
Note:
Specify angle indicated on drawing
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| HW-1206 | 10′-2″ | 4 5/16″ | 3.57# |
Note:
Not for use on curved roofs
For curved applications, please inquire
24 gauge material only
Two week lead time required
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| T-5405 | 10′-2″ | 9 1/4″ | 7.65# |
| T-5406 | 20′-2″ | 9 1/4″ | 15.18# |
Note:
Specify open hem when using with T-5121 Continuous Cleat
