| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL- 250 | 10′-2″ | 14 1/4″ | 9.77# |
| FL-251 | 20′-2″ | 14 1/4″ | 19.62# |
Note:
Use with Ultra-Dek® and Double-Lok® roof systems only
Specify roof slope
Specify open hem when using with FL-338 Continuous Cleat
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL- 252 | 10′-2″ | 15 1/4″ | 10.46# |
| FL-253 | 20′-2″ | 15 1/4″ | 21.00# |
Note:
Use with BattenLok® HS and SuperLok® roof systems only
Specify roof slope
Specify open hem when using with FL-338 Continuous Cleat
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL-863 | 10′-2″ | 22 7/8″ | 18.92# |
Note:
Use with Double-Lok® roof systems only
Specify roof slope
Add $7.62 per piece for mitered trim – Specify left or right
| Part # | DIM “A” | Length | Girth | Roof Slope | Weight Each |
|---|---|---|---|---|---|
| FL-265 | 2″ | 10′-2″ | 20 3/8″ | 1/4-1 3/4:12 | 14.36# |
| FL-265B | 3 11/16″ | 10′-2″ | 22 1/16″ | 1 13/16-4:12 | 14.57# |
Note:
Use with all SSR roof systems
Specify roof slope
Specify open hem when using with FL-338 Continuous Cleat
Add $7.62 per piece for mitered trim – Specify left or right
24.22#
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL-744 | 10′-2″ | 18 3/4″ | 24.22# |
| FL-253 | 20′-2″ | 18 3/4″ | 26.22# |
Note:
Use with all SSR roof systems
Specify roof slope
Add $7.62 per piece for mitered trim – Specify left or right
24.22#
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL-270 | 10′-2″ | 11 3/8″ | 8.38# |
Note:
Specify roof slope or angle indicated on drawing
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL-325 | 10′-2″ | 8 5/8″ | 7.10# |
| FL-326 | 20′-2″ | 8 5/8″ | 14.25# |
Note:
24 gauge material
Specify roof slope or angle indicated on drawing
Specify open hem when using with FL-338 Continuous Cleat
| Part # | Length | Girth | Weight Each |
|---|---|---|---|
| FL-331 | 10′-2″ | 16 7/8″ | 13.06# |
| FL-332 | 20′-2″ | 16 7/8″ | 26.23# |
Note:
24 gauge material
Specify roof slope or angle indicated on drawing
Specify open hem when using with FL-338 Continuous Cleat
