Ridge or Peak Trim | Architectural Trim

Ridge/Hip Flash - Fixed

Part #	DIM “A”	Length	Girth	Weight Each
T-5071	4 1/2″	10′-2″	10″	8.19#
T-5072	4 1/2″	20′-2″	10″	16.38#
T-5073	5 1/2″	10′-2″	12″	9.85#
T-5074	5 1/2″	20′-2″	12″	19.65#
T-5075	6 1/2″	10′-2″	14″	11.45#
T-5076	6 1/2″	20′-2″	14″	22.90#

Note:

Specify roof slope or angle indicated on drawing
Specify use for ridge or hip

Ridge Flash - Floating

Part #	Length	Girth	Weight Each
T-5087	10′-2″	6 1/2″	13.49#
T-5088	20′-2″	6 1/2″	26.98#

Note:

For LokSeam® only
For use without Ridge Vent Material – 18″ peak purlin spacing
Specify roof slope or angle indicated on drawing

Ridge Flash For Vent

Part #	Length	Girth	Weight Each
T-5089	10′-2″	21 1/2″	17.79#
T-5090	20′-2″	21 1/2″	31.95#

Note:

For LokSeam® or Craftsman® Series
Use with FL-254 Perforated Vent Drip – 18″ purlin spacing
Specify roof slope or angle indicated on drawing

Ridge Flash For Metal Vent

Part #	Length	Girth	Weight Each
FL-540	10′-2″	22 1/4″	14.67#

Note:

For LokSeam® only
Use with HW-525 Metal Vent Material – 18″ peak purlin spacing
Specify roof slope or angle indicated on drawing

Perforated Vent Drip

Part #	Length	Girth	Weight Each
FL-254	10′-2″	6 3/4″	5.58#

Note:

24 gauge material – Galvalume® Plus only
Use with T-5089 or T-5090 Ridge Flash for Vent

Peak Cap

Part #	DIM “A”	DIM “B”	Length	Girth	Weight Each
T-5077	4 1/2″	5″	10′-2″	11 1/8″	9.08#
T-5078	4 1/2″	5″	20′-2″	11 1/8″	18.16#
T-5079	5 1/2″	5″	10′-2″	12 1/8″	10.05#
T-5080	5 1/2″	5″	20′-2″	12 1/8″	20.10#
T-5081	4 1/2″	4″	10′-2″	10 1/8″	8.26#
T-5082	4 1/2″	4″	20′-2″	10 1/8″	16.52#
T-5083	5 1/2″	4″	10′-2″	11 1/8″	9.08#
T-5084	5 1/2″	4″	20′-2″	11 1/8″	18.16#
T-5085	10 1/4″	5″	10′-2″	16 7/8″	12.95#
T-5086	10 1/4″	5″	20′-2″	16 7/8″	25.91#

Note:

Specify open hem when using with T-5121 Continuous Cleat
Specify roof slope or angle indicated on drawing

Find a sales representative

View all reps and locations