CSI Guide Specifications

BattenLok^® CSI Specifications

MBCI BattenLok HS Metal Roof Panels MBCI's BattenLok HS is a mechanically field-seamed, high strength structural standing seam roof system. BattenLok HS panels are available in 12 and 16-inch widths. BattenLok HS can be installed directly over purlins or bar joists and is capable of transitioning from roof to fa

Classic^® Series CSI Specifications

MBCI Classic Series Soffit Panels The Classic Series is a time-tested performer. Through the years, this panel has been used for canopies, walkway covers and soffits. Proven capabilities make this a versatile and valuable design tool. The Classic Serie s creates a clean, flush appearance when used as a canopy sys

Curved BattenLok^® CSI Specifications

MBCI Curved BattenLok Metal Roof Panels MBCI's Curved BattenLok is a mechanically field-seamed, structural standing seam roof system. Curved BattenLok panels are available in 16-inch width only. Curved BattenLok can be installed directly over purlins o r bar joists. Curved BattenLok panels do not require a solid

Double-Lok^® CSI Specifications

MBCI Double-Lok Metal Roof Panels MBCI's Double-Lok is a field-seamed, trapezoidal leg standing seam metal roof panel. Double-Lok panels are available in 18 and 24-inch widths, for application on roofs with a minimum slope of 1/4 inch in 12 inches. The y are ideal for industrial, commercial and architectural appl

FlexLoc^® CSI Specifications

LokSeam^® CSI Specifications

MBCI LokSeam Metal Roof Panels MBCI's LokSeam is a snap-together standing seam roof system with a 1 3/4 inch tall vertical rib, for use on roofs with a minimum slope of 3:12. LokSeam panels are available in 12-inch, 16-inch and 18-inch widths. LokSeam panels can be installed over open framing or a solid substruc

NuRoof^® CSI Specifications - Section 05165

NuRoof SPECIFICATIONS SECTION 05165 COLD-FORMED METAL RETROFIT ROOF FRAMING SYSTEM The specification following this cover page is provided to assist the Design Professional in creating a performance specification for a structural retrofit roof framing system. It is designed to ensure that critical informati

NuRoof CSI Specifications - Section 54600

NuRoof SPECIFICATIONS SECTION 05 46 00 COLD-FORMED METAL RETROFIT ROOF FRAMING SYSTEM Formatted to MasterFormat™ 2004 The specification following this cover page is provided to assist the Design Professional in creating a performance specification for a structural retrofit roof framing system. It is design

QwikLok™ CSI Specifications

QWIKLOC SPECIFICATIONS Effective March 17, 1999 For Technical Assistance regarding UL and the requirements involved to meet UL or other codes, please contact MBCI Technical Services at 877-713-6224, ext. 28612. If you have difficulties with downloadin g or editing these specifications, contact our Help Desk at i

SuperLok^® CSI Specifications

MBCI SuperLok Metal Roof Panels MBCI's SuperLok is a mechanically field-seamed, vertical leg standing seam roof system that combines a 2-inch tall slim rib with exceptional uplift resistance. It is available in both 12-inch and 16-inch widths. SuperLok has been designed to withstand the most rigorous weather con

Ultra-Dek^® CSI Specifications

MBCI Ultra-Dek Metal Roof Panels MBCI's Ultra-Dek is a snap-joint, trapezoidal leg standing seam metal roof panel. Ultra-Dek panels are available in 18 and 24-inch widths, for application on roofs with a minimum slope of 1/4 inch in 12 inches. They are ideal for industrial, commercial and architectural applicati

Joint Sealant Specifications

Craftsman™ Series CSI Specifications

Exposed Fastener Metal Roof Panels CSI Specifications

Formed Metal Roof Panels Specifications

Copyright 2015 by The American Institute of Architects (AIA) Exclusively published and distributed by AVITRU, LLC for the AIA This Product MasterSpec Section is licensed by AVITRU, LLC to MBCI ("Licensee"). This Product MasterSpec Section modifies the orig inal MasterSpec text and does not include the full content o

Standing Seam Metal Roof Panel Specifications

Copyright 2015 by The American Institute of Architects (AIA) Exclusively published and distributed by AVITRU, LLC for the AIA This Product MasterSpec Section is licensed by AVITRU, LLC to MBCI ("Licensee"). This Product MasterSpec Section modifies the orig inal MasterSpec text and does not include the full content o

LS-36™ CSI Specifications

CFR CSI Specifications

Artisan Panel CSI Specifications

MBCI Artisan Soffit and Liner Panel The simplicity of the Artisan panel is its best design feature. Uniform dimensions and a clean appearance allow the designer to plan modules, eliminate complicated pieces and follow wall curvatures. The Artisan panel c an be vertical, horizontal, perpendicular or skewed to the bu

Designer Series CSI Specifications

MBCI Designer™ Series Formed Metal Wall Panels The Designer Series panels provide the toughness of metal while creating an attractive, flexible and functional wall or fascia panel. The Designer Series is offered in fluted and flat panels, which are equa lly effective for new construction or retrofitting existing b

FW-120 CSI Specifications

MBCI FW-120 Formed Metal Wall Panels The FW-120 panel is a concealed fastener wall and liner panel that provides a flat appearance. FW-120 is commonly used for architectural, commercial and industrial markets. The heavy gauge offering provides for large spanning capabilities, particularly in composite wall applic

NuWall^® CSI Specifications

MBCI NuWall Formed Metal Wall Panels The NuWall wall panel can be used for either new construction or for retrofit construction as a metal-over-metal system. This concealed fastener system creates a clean, uninterrupted wall. The NuWall system is based on a 12-inch module; when using NuWall over existing metal p

ShadowRib™ CSI Specifications

MBCI ShadowRib™ Formed Metal Wall Panels ShadowRib is a 3-inch- deep panel that combines aesthetics, economy and function to bring definition to metal structures. ShadowRib is a proven performer and a versatile tool to the designer. Structural strength in the ShadowRib panel is accomplished without sacrificing ap

Joint Sealant Specifications

Exposed Fastener Metal Wall Panels CSI Specifications

MBCI Exposed Fastener Metal Wall Panels MBCI manufactures metal panels with the most technologically advanced manufacturing line in the United States. Our metal panel color and applied finish offerings allow for a multitude of design opportunities. MBCI offers a full array of accessories, including ventilators, l

MasterLine 16^® Specifications

MBCI MasterLine 16 Formed Metal Wall Panels The MasterLine 16 Architectural wall panel is a concealed fastener wall panel that provides a unique profiled appearance. The Impression Panel is commonly used for architectural, commercial and industrial mark ets. Panels are available in 24-18 gauge, providing for a var

Formed Metal Wall Panels Specifications

Copyright 2015 by The American Institute of Architects (AIA) Exclusively published and distributed by AVITRU, LLC for the AIA This Product MasterSpec Section is licensed by AVITRU, LLC to MBCI ("Licensee"). This Product MasterSpec Section modifies the orig inal MasterSpec text and does not include the full content o

Insulated Metal Wall Panel Specifications

Copyright 2015 by The American Institute of Architects (AIA) Exclusively published and distributed by AVITRU, LLC for the AIA This Product MasterSpec Section is licensed by AVITRU, LLC to MBCI ("Licensee"). This Product MasterSpec Section modifies the orig inal MasterSpec text and does not include the full content o

Backup Wall CSI Guide Specifications

M BCI BW Systems Insulated Backup Wall System BW Systems are designed to work with a variety of other cladding materials as the backup system, making it an excellent choice when multiple cladding materials are used on a project. The unique composite design of a BW Systems panel provides an air barrier, vapor barrier,

CF Architectural Horizontal CSI Specifications

Concealed Fastener Insulated Vertical Walls CSI Specifications

MBCI Concealed Fastener (CF) Vertical Insulated Metal Wall Panels MBCI Insulated Metal Panels (IMPs) consist of two single-skin metal facings and a factory-foamed-in-place core. MBCI offers IMPs for both roof and wall applications. The foam insulation i s made of non-chlorofluorocarbon (non-CFC) polyurethane foam.

HPCI Barrier™ CSI Specifications

LS-36™ CSI Specifications

ThermalSafe^® Fire Resistant CSI Specifications