Curved BattenLok®

The Curved BattenLok® profile is a water-shedding, curved standing seam metal roof system with a 2-inch tall standing seam that is field-seamed during the installation process.

Curved BattenLok® may be curved to a minimum radius of 20 feet. Curved BattenLok® is a structural roofing panel and may be installed directly over purlins or joists. This curved standing seam metal roof system also may be installed over wood decks and metal decks with rigid insulation. Open framing applications eliminate costly curved deck surfaces and membrane underlayments.

Please Note: MBCI is no longer offering factory curved panels, or arranging for curving equipment to be delivered to the jobsite to curve onsite.

The Curved BattenLok can be walked down over open framing on a radius of 200’-0” or greater, and can be walked down over solid substrate with a radius of 180’-0” or greater. Any radius less than these amounts will need to be curved by an outside vendor.   For large projects and/or long panel lengths, the panels may need to be curved onsite.  The customer will need to make arrangements with the outside vendor, and coordinate delivery accordingly.



Coverage Width: 16"

Panel Attachment : Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)

Gauge : 24 (standard)

Finishes : Smooth Striated (standard)

Coatings : Galvalume Plus®, Signature® 200, Signature® 300

Standard Colors:

Hover over a swatch to see a large view.

Find a sales representative