Cleats Closures Downspout Eave Trim End Trim and Straps Fascia Flashing and Coping Gutters Parapet Trim Rake Trim Ridge or Peak Trim Starter or Sill Trim Valley Trim
  1. Home
  2. Products
  3. ComponentsTrimStanding Seam Roof Trim
  4. End Trim and Straps

Box Panel Cap Trim

Part # Length Girth Weight Each
FL-272 10′-2″ 8″ 5.27#

Note:
Specify roof slope or angle indicated on drawing

Double-Lok® Repair Cap

Part # Length Weight Each
HW-1210 10′-3″ 4.37#

Note:
Use with Double-Lok® panels only
Double-Lok® Repair Caps are made from .060″ extruded aluminum
Mill Finish in stock
Allow 15 day lead time for other standard colors

Offset Panel Cap Trim

Part # Length Girth Weight Each
FL-797 1″ 10″ .07#

Offset Panel Cap Trim Note:
Use with PBR or AVP wall panels
Specify roof slope or angle indicated on drawing

Downspout Strap

Part # Length Girth Weight Each
FL-271 10′-2″ 7 1/2″ 4.95#

Note:
Use with FL-630 Alternate SLX Gutter – Box
Specify left or right

BattenLok® HS - SLX Box End Cap

Part # Weight Each
FL-651 .22#

Note:
Use with FL-630 Alternate SLX Gutter – Box
Specify left or right

BattenLok® HS - SLX Standard End Cap

24.22#

Part # Weight Each
FL-652 .30#

Note:

  • Use with FL-632 Alternate SLX Gutter – Standard
  • Specify left or right

BattenLok® HS - SLX Snow Large End Cap

24.22#

Part # Weight Each
FL-653 .44#

Note:

  • Use with FL-636 Alternate SLX Gutter – Snow Large
  • Specify left or right

BattenLok® HS - SLX Sidewall Large End Cap

24.22#

Part # Weight Each
FL-654 .53#

Note:

  • Use with FL-634 Alternate SLX Gutter – Sidewall Large
  • Specify left or right

Style High Side Eave End Cap

 

Part # Weight Each
FL-745 .20#

Note:
Use with all SSR roof systems
Specify left or right
Specify roof slope

Parapet Corner Box

Part # Length Girth Weight Each
FL-299 18″ 18″ 1.75#

Notes:
Use with all SSR roof systems
Use with FL-276 Parapet High Side Eave Flashing – Fixed or FL-274/275 Parapet High Side Eave Flashing – Floating and FL-280, FL-281 or FL-282 Parapet Rake Flash – Fixed or FL-285, FL-286 or FL-287 Parapet Rake Flash – Floating
Use HW-5300 9″ Flashdek or HW-5302 12″ Flashdek to seal Parapet Flashing to parapet w all
Field cut to fit Parapet Flashing profile

Sculptured Low Eave Corner Box

Part # Weight Each
FL-132 1.69#
FL-132B 1.69#

Note:
Specify left or right
Specify roof slope
Use FL-132 with Ultra-Dek® and Double-Lok® roof systems only
Use FL-132 with FL-250 or FL-251 Sculptured Eave Trim and FL-110 or FL-111 Sculptured Rake Trim
Use FL-132B with BattenLok® HS and SuperLok® roof systems only
Use FL-132B with FL-252 or FL-253 Sculptured Eave Trim and FL-110 or FL-111 Sculptured Rake Trim

Parapet Peak Box

Part # Girth Weight Each
FL-295 14″ 2.24#
FL-297 16″ 2.76#

Note:
Use with all SSR roof systems
Use HW-5300 9″ Flashdek or HW-5302 12″ Flashdek to seal Ridge Flashing to parapet wall
Field cut to fit Ridge Flashing profile
Use FL-295 with FL-200, FL-202, FL-213 or FL-214 Ridge Flashing – Floating, FL-300 or FL-302 Ridge Flashing or FL-540 or FL-541 Ridge Flashing for Metal Vent
Use FL-297 with FL-205 or FL-207 Ridge Flashing Floating

Fixed Peak Box - Sculptured Rake

Part # Length Girth Roof Slope Weight Each
FL-120 1′-6″ 21″ 1/2-6:12 2.36#
FL-121 2′-6″ 21″ 1/2-3 3/4:12 3.71#

Fixed Peak Box – Sculptured Rake Note:
Use with Ultra-Dek®, BattenLok® HS and SuperLok® roof systems only
Use FL-120 with FL-209 or FL-211 Ridge/Hip Flashing and FL-110 or FL-111 Sculptured Rake Trim
Use FL-121 with FL-212 Ridge/Hip Flashing and FL-110 or FL-111 Sculptured Rake Trim
Specify roof slope

Floating Peak Box - Sculptured Rake

Part # Length Girth Roof Slope Weight Each
FL-125 2′-1″ 33 1/4″ 1/4-6:12 5.92#
FL-126 2′-6″ 37 1/4″ 1/4-6:13 7.41#

Floating Peak Box – Sculptured Rake Note:
Use with all SSR roof systems
Specify roof slope
Price includes Cinch Angles and Flexible Membrane
Use FL-125 with FL-200, FL-202, FL-213 or FL-214 Ridge Flashing – Floating, FL-300 or FL-302 Ridge Flashing or FL-540 or FL-541 Ridge Flashing for Metal Vent and FL-110 or FL-111 Sculptured Rake Trim
Use FL-126 with FL-205 or FL-207 Ridge Flashing – Floating or FL-303 or FL-304 Ridge Flashing or FL-543 or FL-544 Ridge Flashing for Metal Vent and FL-110 or FL-111 Sculptured Rake Trim

Box Gutter End Cap

Part # Weight Each
FL-309 .31#

Box Gutter End Cap Note:
Use with FL-307 or FL-308 Box Gutter
24 gauge material
Specify Left or Right

Box Gutter Strap

Part # Length Girth Weight Each
FL-310 10″ 2″ .14#

Box Gutter Strap Note:
Use with FL-307 or FL-308 Box Gutter
24 gauge material

Gutter Strap

Part # Length Girth Weight Each
FL-246 10″ 2 1/4″ .30#

Gutter Strap Note:
18 gauge material
Use with FL-240A/B/F, FL-241A/B/F, FL-247A/B/H or FL-248A/B/H Sculptured Gutter
Use with FL-730A/B, FL-732A/B, FL-752A/B or FL-754A/B Style Gutter

SLX Gutter Hanger

Part # Length Girth Weight Each
HW-1211 18″ 6 1/8″ .87#

SLX Gutter Hanger Note:
22 gauge material
Use with FL-630 SLX Gutter-Box, FL-632 SLX Gutter-Standard, FL-634 SLX Gutter-SW Large or FL-636 SLX Gutter-Snow Large

Gutter Ends

Part # Weight Each
FL-245 .38#

Gutter Ends Notes:
Use with all Sculptured or Style Gutters
End Caps will be made to fit gutter ordered
Specify left or right
Specify gutter part number

Sculptured Rake End

Part # Weight Each
FL-134 1.54#

Sculptured Rake End Note:
Use with all SSR roof systems only
Use with FL-110 or FL-111 Sculptured Rake Trim
Specify left or right

Ridge End Cap

Part # Weight Each
FL-201 .15#

Ridge End Cap Note:
Specify ridge flash to be used and roof slope

Find a sales representative
View all reps and locations