Ridge/Hip Flash - Fixed

Part # DIM “A” Length Girth Weight Each
T-5071 4 1/2″ 10′-2″ 10″ 8.19#
T-5072 4 1/2″ 20′-2″ 10″ 16.38#
T-5073 5 1/2″ 10′-2″ 12″ 9.85#
T-5074 5 1/2″ 20′-2″ 12″ 19.65#
T-5075 6 1/2″ 10′-2″ 14″ 11.45#
T-5076 6 1/2″ 20′-2″ 14″ 22.90#

Note:

  • Specify roof slope or angle indicated on drawing
  • Specify use for ridge or hip

Ridge Flash - Floating

Part # Length Girth Weight Each
T-5087 10′-2″ 6 1/2″ 13.49#
T-5088 20′-2″ 6 1/2″ 26.98#

Note:

  • For LokSeam® only
  • For use without Ridge Vent Material – 18″ peak purlin spacing
  • Specify roof slope or angle indicated on drawing

Ridge Flash For Vent

Part # Length Girth Weight Each
T-5089 10′-2″ 21 1/2″ 17.79#
T-5090 20′-2″ 21 1/2″ 31.95#

Note:

  • For LokSeam® or Craftsman® Series
  • Use with FL-254 Perforated Vent Drip – 18″ purlin spacing
  • Specify roof slope or angle indicated on drawing

Ridge Flash For Metal Vent

Part # Length Girth Weight Each
FL-540 10′-2″ 22 1/4″ 14.67#

Note:

  • For LokSeam® only
  • Use with HW-525 Metal Vent Material – 18″ peak purlin spacing
  • Specify roof slope or angle indicated on drawing

Perforated Vent Drip

Part # Length Girth Weight Each
FL-254 10′-2″ 6 3/4″ 5.58#

Note:

  • 24 gauge material – Galvalume® Plus only
  • Use with T-5089 or T-5090 Ridge Flash for Vent

Peak Cap

Part # DIM “A” DIM “B” Length Girth Weight Each
T-5077 4 1/2″ 5″ 10′-2″ 11 1/8″ 9.08#
T-5078 4 1/2″ 5″ 20′-2″ 11 1/8″ 18.16#
T-5079 5 1/2″ 5″ 10′-2″ 12 1/8″ 10.05#
T-5080 5 1/2″ 5″ 20′-2″ 12 1/8″ 20.10#
T-5081 4 1/2″ 4″ 10′-2″ 10 1/8″ 8.26#
T-5082 4 1/2″ 4″ 20′-2″ 10 1/8″ 16.52#
T-5083 5 1/2″ 4″ 10′-2″ 11 1/8″ 9.08#
T-5084 5 1/2″ 4″ 20′-2″ 11 1/8″ 18.16#
T-5085 10 1/4″ 5″ 10′-2″ 16 7/8″ 12.95#
T-5086 10 1/4″ 5″ 20′-2″ 16 7/8″ 25.91#

 

Note:

  • Specify open hem when using with T-5121 Continuous Cleat
  • Specify roof slope or angle indicated on drawing

Find a sales representative