Rake Support - Low

Part # SSR System Size Gauge Length Finish
HW-7710 UD & DL 3 3/8″ x 2 1/2″ 14 20′-0″ Red Oxide
HW-7710 UD & DL 3 3/8″ x 2 1/2″ 14 20′-0″ Galvanized
HW-7712 BL & SLK 2 3/8″ x 3 1/2″ 14 20′-0″ Red Oxide
HW-7712 BL & SLK 2 3/8″ x 3 1/2″ 14 20′-0″ Galvanized

Note:
Use with Low Clips

Rake Support - High

Part # SSR System Size Gauge Length Finish
HW-7720 UD & DL 4 3/8″ x 1 1/2″ 14 20′-0″ Red Oxide
HW-7720 UD & DL 4 3/8″ x 1 1/2″ 14 20′-0″ Galvanized
HW-7722 BL & SLK 3″ x 2 7/8″ 14 20′-0″ Red Oxide
HW-7722 BL & SLK 3″ x 2 7/8″ 14 20′-0″ Galvanized

Note:
Use with High Clips

Rake Support - Utility

Part # SSR System Size Gauge Length Finish
HW-7722 UD 3″ x 2 7/8″ 14 20′-0″ Red Oxide
HW-7722 UD 3″ x 2 7/8″ 14 20′-0″ Galvanized
HW-7732 BL & SLK 2″ x 3 7/8″ 14 20′-0″ Red Oxide
HW-7732 BL & SLK 2″ x 3 7/8″ 14 20′-0″ Galvanized

Note:
Use with Utility Clips

Rake Support 2" Standoff

Part # SSR System Size Gauge Length Finish
HW-7664 DL 5″ x 2 15/16″ 14 20′-0″ Red Oxide

Note:
Use with Double-Lok® roof system only
Use with 2″ Sliding Hi-Thermal Clips

Retro-Fit Clip Zee

Part # SSR System Gauge Length Finish Weight Each
HW-4657 DL 14 10′-6″ Red Oxide 15.34#
HW-4657 DL 12 10′-6″ Red Oxide 15.34#

Note:
Used at edge zones when tighter clip spacing is required

Retro-Fit Eave Angle

Part # SSR System Gauge Length Finish Weight Each
HW-4658 DL 16 8′-0″ Galvanized 13.06#
HW-4658 DL 14 8′-0″ Galvanized 15.62#
HW-4658 DL 12 8′-0″ Galvanized 23.32#

Note:
Used at the eave when installing Ultra-Dek® or Double-Lok® over existing R panel roof
Specify existing roof slope

Find a sales representative